{"id":43775,"date":"2021-05-25T15:35:45","date_gmt":"2021-05-25T15:35:45","guid":{"rendered":"https:\/\/www.simscale.com\/?page_id=43775"},"modified":"2026-02-08T00:32:09","modified_gmt":"2026-02-08T00:32:09","slug":"cht-battery-pack","status":"publish","type":"page","link":"https:\/\/www.simscale.com\/docs\/validation-cases\/cht-battery-pack\/","title":{"rendered":"Validation case: Conjugate Heat Transfer in a Battery Pack"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">The aim of this project is to demonstrate the validity of SimScale&#8217;s <a href=\"https:\/\/www.simscale.com\/docs\/analysis-types\/conjugate-heat-transfer-analysis\/\">CHT v2.0<\/a> an<a href=\"https:\/\/www.simscale.com\/docs\/analysis-types\/convective-heat-transfer-analysis\/radiation\/\">d CHT IBM<\/a> solver by performing a conjugate heat transfer analysis of a battery pack and comparing the following parameter:<\/p>\n\n\n\n\n\n\n<ul class=\"wp-block-list\">\n<li>&nbsp;Local temperatures at available thermocouple locations<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">The simulation results of SimScale were compared to the results presented in&nbsp;[1]. Code Verification is also carried out by comparing the SimScale results to Fluent results.<\/p>\n\n\n\n<div class=\"hw-block hw-btnWrapper hw-btnWrapper--alignCenter \">\n    <a href=\"https:\/\/www.simscale.com\/workbench\/?pid=4749644354343900288&#038;mi=spec%3A835dbbb6-a045-4649-b9b5-f4a3ce4188c4%2Cservice%3ASIMULATION%2Cstrategy%3A74\" class=\"hw-btn    \" rel=\"noopener \" target=\"_blank\"    >\n        View Project    <\/a>\n<\/div>\n\n\n\n\n<div class=\"hw-block hw-note hw-note--info hw-note\">\n    <div class=\"hw-note__title\">\n        <p class=\"hw-note__titleText\"><i class=\"fa fa-exclamation-circle\" aria-hidden=\"true\"><\/i>Note<\/p>\n    <\/div>\n    <div class=\"hw-note__body\">\n        <p>The validation case consists of two geometries <em>Battery_Pack<\/em> and <em>Battery_Pack_v2<\/em>. Both are essentially same however <em>Battery_Pack_v2<\/em> is devoid of redundant face splits as compared to <em>Battery_Pack<\/em>.<\/p>\n    <\/div>\n<\/div>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"geometry\">Geometry<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The geometry can be seen below: <\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large is-resized\"><a href=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Geometry.png\"><img loading=\"lazy\" decoding=\"async\" width=\"663\" height=\"690\" src=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Geometry.png\" alt=\"battery pack cad model\" class=\"wp-image-43782\" style=\"width:663px;height:690px\" srcset=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Geometry.png 663w, https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Geometry-288x300.png 288w\" sizes=\"auto, (max-width: 663px) 100vw, 663px\" \/><\/a><figcaption class=\"wp-element-caption\">Figure 1: The CAD model of the battery pack that was used for the conjugate heat transfer analysis<\/figcaption><\/figure>\n<\/div>\n\n\n<p class=\"wp-block-paragraph\">It represents a 1:1 model reverse-engineered from images in the publication. The battery pack consists of 32 (8&#215;4) cell configuration.<br>The thermocouple location on the leeward side of the cells has been used for validating the conjugate heat transfer solver:<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large is-resized\"><a href=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Thermocouple-location.png\"><img loading=\"lazy\" decoding=\"async\" width=\"407\" height=\"332\" src=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Thermocouple-location.png\" alt=\"thermocouple locations on battery pack\" class=\"wp-image-43792\" style=\"width:305px;height:249px\" srcset=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Thermocouple-location.png 407w, https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Thermocouple-location-300x245.png 300w\" sizes=\"auto, (max-width: 407px) 100vw, 407px\" \/><\/a><figcaption class=\"wp-element-caption\">Figure 2: The placement of the thermocouple locations on the battery pack<\/figcaption><\/figure>\n<\/div>\n\n\n<p class=\"wp-block-paragraph\">The thermocouple readings from cells 3, 19 and 31 have been used for the comparison:<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large is-resized\"><a href=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Placement.png\"><img loading=\"lazy\" decoding=\"async\" width=\"910\" height=\"424\" src=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Placement.png\" alt=\"cells whose thermocouple reading was used for comparison\" class=\"wp-image-43793\" style=\"width:768px;height:400px\" srcset=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Placement.png 910w, https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Placement-300x140.png 300w, https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Placement-768x358.png 768w\" sizes=\"auto, (max-width: 910px) 100vw, 910px\" \/><\/a><figcaption class=\"wp-element-caption\">Figure 3: For the comparison the thermocouple reading from cell 3 in row 1, cell 19 in row 3 and cell 31 in row 4 were used.<\/figcaption><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\" id=\"analysis-type-and-mesh\">Analysis Type and Mesh<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Tool Type<\/strong>: <a href=\"https:\/\/www.openfoam.com\/\" target=\"_blank\" rel=\"noreferrer noopener\">OpenFOAM\u24c7<\/a><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Analysis Type<\/strong>: Compressible, steady-state analysis with the <a href=\"https:\/\/www.simscale.com\/docs\/analysis-types\/conjugate-heat-transfer-analysis\/\">CHT v2.0<\/a> and <a href=\"https:\/\/www.simscale.com\/docs\/analysis-types\/immersed-boundary-analysis\/\">CHT IBM<\/a> solver.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Mesh and Element Types<\/strong>:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The&nbsp;<strong><a href=\"https:\/\/www.simscale.com\/docs\/simulation-setup\/meshing\/standard\/\">Standard mesher<\/a>&nbsp;<\/strong>algorithm with tetrahedral and hexahedral cells was used to generate the mesh. A mesh sensitivity analysis has been carried out to determine the dependence of the CHTv2 solver temperature predictions on the mesh, while using lead as the material of the cells:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><tbody><tr><td class=\"has-text-align-center\" data-align=\"center\"><strong>Mesh Type<\/strong><\/td><td class=\"has-text-align-center\" data-align=\"center\"><strong>Number of cells\/nodes<\/strong><\/td><td class=\"has-text-align-center\" data-align=\"center\"><strong>Temperature@L1-cell3 [\\(\u00b0C\\)]<\/strong><\/td><td class=\"has-text-align-center\" data-align=\"center\"><strong>Temperature@L1-cell19 \\([\u00b0C]\\)<\/strong><\/td><td class=\"has-text-align-center\" data-align=\"center\"><strong>Temperature@L1-cell31 <strong>\\([\u00b0C]\\)<\/strong><\/strong><\/td><\/tr><tr><td class=\"has-text-align-center\" data-align=\"center\">Mesh 1<\/td><td class=\"has-text-align-center\" data-align=\"center\">3.6M cells, 1.1M nodes<\/td><td class=\"has-text-align-center\" data-align=\"center\">29.535<\/td><td class=\"has-text-align-center\" data-align=\"center\">31.065<\/td><td class=\"has-text-align-center\" data-align=\"center\">26.816<\/td><\/tr><tr><td class=\"has-text-align-center\" data-align=\"center\">Mesh 2<\/td><td class=\"has-text-align-center\" data-align=\"center\">11.2M cells, 3.5M nodes<\/td><td class=\"has-text-align-center\" data-align=\"center\">30.794<\/td><td class=\"has-text-align-center\" data-align=\"center\">31.114<\/td><td class=\"has-text-align-center\" data-align=\"center\">27.218<\/td><\/tr><tr><td class=\"has-text-align-center\" data-align=\"center\">%TC deviation (Mesh 2 &#8211; Mesh 1)<\/td><td class=\"has-text-align-center\" data-align=\"center\"><\/td><td class=\"has-text-align-center\" data-align=\"center\">4.089<\/td><td class=\"has-text-align-center\" data-align=\"center\">0.157<\/td><td class=\"has-text-align-center\" data-align=\"center\">1.477<\/td><\/tr><\/tbody><\/table><figcaption class=\"wp-element-caption\">Table 1: The results of the mesh sensitivity analysis indicate the deviation of the temperature on specific points of interest between the two different configurations.<\/figcaption><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Maximum temperature deviation of 1.2 \\(\u00b0C\\) (~4.1%) between Mesh 1 and Mesh 2, was observed at leeward side of cell 3. In the following figure the percentage of temperature deviation in degrees Celsius (% TC) at measurement location L1 is displayed for three different mesh configurations as well:<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large is-resized\"><a href=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Deviation-Graph.png\"><img loading=\"lazy\" decoding=\"async\" width=\"618\" height=\"378\" src=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Deviation-Graph.png\" alt=\"temperature deviation between mesh 1 and mesh 2 cht \" class=\"wp-image-43783\" style=\"width:618px;height:378px\" srcset=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Deviation-Graph.png 618w, https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Deviation-Graph-300x183.png 300w\" sizes=\"auto, (max-width: 618px) 100vw, 618px\" \/><\/a><figcaption class=\"wp-element-caption\">Figure 4: It is revealed from the mesh sensitivity study that the biggest deviation in temperature between the two meshes was observed in cell 3, and the smallest one in cell 19.<\/figcaption><\/figure>\n<\/div>\n\n\n<p class=\"wp-block-paragraph\">In order to estimate the physical properties of the cells, a material sensitivity study has also been carried out, using three different materials:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Lead (low conductivity)<\/li>\n\n\n\n<li>Aluminium (medium conductivity)<\/li>\n\n\n\n<li>Copper (high conductivity)<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Comparing L1 temperatures for the three materials, according to the diagrams below, aluminium cells show the closest match:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>to thermocouple readings at all three measurement cells (3,19 and 31);<\/li>\n\n\n\n<li>to ANSYS Fluent predictions at all three measurement cells (3,19 and 31).&nbsp;<\/li>\n<\/ul>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large is-resized\"><a href=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/05\/Material-Study-Graph-1-1.png\"><img loading=\"lazy\" decoding=\"async\" width=\"509\" height=\"619\" src=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/05\/Material-Study-Graph-1-1.png\" alt=\"material study and temperature deviation at different cells\" class=\"wp-image-45687\" style=\"width:509px;height:619px\" srcset=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/05\/Material-Study-Graph-1-1.png 509w, https:\/\/frontend-assets.simscale.com\/media\/2021\/05\/Material-Study-Graph-1-1-247x300.png 247w\" sizes=\"auto, (max-width: 509px) 100vw, 509px\" \/><\/a><figcaption class=\"wp-element-caption\">Figures 5: Aluminum was proved to be the material with the smallest temperature deviation for all three cells compared to the experimental data, and the results from the Fluent software.<\/figcaption><\/figure>\n<\/div>\n\n\n<p class=\"wp-block-paragraph\">Hence, based on the material and mesh sensitivity analyses, aluminum cells and \u201cMesh 2\u201d have been used for the final validation using CHT v2.0 analysis.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large is-resized\"><a href=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/04\/Mesh-Validation-Case-with-Battery-Details.jpg\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"597\" src=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/04\/Mesh-Validation-Case-with-Battery-Details-1024x597.jpg\" alt=\"mesh details and zoom in to the cells inside the battery\" class=\"wp-image-44877\" style=\"width:1024px;height:597px\"\/><\/a><figcaption class=\"wp-element-caption\">Figure 6: &#8220;Mesh 2&#8221; used for the case after the sensitivity study is a fine mesh with tetrahedral and hexahedral cells for the CHT v2.0 simulation.<\/figcaption><\/figure>\n<\/div>\n\n\n<p class=\"wp-block-paragraph\">For CHT IBM analysis the IBM solver creates a <a href=\"https:\/\/www.simscale.com\/docs\/analysis-types\/immersed-boundary-analysis\/#cartesian-mesh\">Cartesian mesh<\/a> that does not resolve every part separately as in a body-fitted meshing approach, but refines the Cartesian grid towards geometrical and topological details and immerses the geometry into it. The detailed treatment is done on the solver level instead.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><a href=\"https:\/\/frontend-assets.simscale.com\/media\/2023\/08\/ibm-battery-pack-mesh.png\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"543\" src=\"https:\/\/frontend-assets.simscale.com\/media\/2023\/08\/ibm-battery-pack-mesh-1024x543.png\" alt=\"battery pack mesh using cht ibm solver\" class=\"wp-image-78309\" srcset=\"https:\/\/frontend-assets.simscale.com\/media\/2023\/08\/ibm-battery-pack-mesh-1024x543.png 1024w, https:\/\/frontend-assets.simscale.com\/media\/2023\/08\/ibm-battery-pack-mesh-300x159.png 300w, https:\/\/frontend-assets.simscale.com\/media\/2023\/08\/ibm-battery-pack-mesh-768x408.png 768w, https:\/\/frontend-assets.simscale.com\/media\/2023\/08\/ibm-battery-pack-mesh-1536x815.png 1536w, https:\/\/frontend-assets.simscale.com\/media\/2023\/08\/ibm-battery-pack-mesh.png 1860w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/a><figcaption class=\"wp-element-caption\">Figure 7: Battery pack mesh using the CHT IBM solver<\/figcaption><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\" id=\"simulation-setup\">Simulation Setup<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Fluid Material<\/strong>:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Air\n<ul class=\"wp-block-list\">\n<li>Dynamic viscosity \\((\\mu)\\) = 1.83e-5 \\(m^2 \\over\\ s\\) <\/li>\n\n\n\n<li>Specific heat = 1004 \\(J \\over\\ (kg \\times\\ K)\\)<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Solid Materials<\/strong>:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Wood\n<ul class=\"wp-block-list\">\n<li>Isotropic<\/li>\n\n\n\n<li>Thermal conductivity \\((k)\\) = 0.16 \\(W \\over\\ (m \\times\\ K)\\)<\/li>\n\n\n\n<li>Specific heat = 1260 \\(J \\over\\ (kg \\times\\ K)\\)<\/li>\n\n\n\n<li>Density \\((\\rho)\\) = 500 \\(kg \\over\\ m^3\\)<\/li>\n<\/ul>\n<\/li>\n\n\n\n<li>Aluminum\n<ul class=\"wp-block-list\">\n<li>Isotropic<\/li>\n\n\n\n<li>Thermal conductivity \\((k)\\) = 235 \\(W \\over\\ (m \\times\\ K)\\)<\/li>\n\n\n\n<li>Specific heat = 897 \\(J \\over\\ (kg \\times\\ K)\\)<\/li>\n\n\n\n<li>Density \\((\\rho)\\) = 2700 \\(kg \\over\\ m^3\\)<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Boundary Conditions<\/strong>: <\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Room temperature, \\((T)\\) = 23 \\(\u00b0C\\)<\/li>\n\n\n\n<li>Inlet velocity = 3.45 \\(m \\over\\ s\\)<\/li>\n\n\n\n<li>Outlet pressure = 101325 \\(Pa\\) (fixed value)<\/li>\n\n\n\n<li>Absolute power = 2.75 \\(W\\) per cell&nbsp;<\/li>\n\n\n\n<li><a href=\"https:\/\/www.simscale.com\/docs\/simulation-setup\/boundary-conditions\/wall\/\">No-slip walls<\/a><\/li>\n<\/ul>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large is-resized\"><a href=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Boundary-Conditions.png\"><img loading=\"lazy\" decoding=\"async\" width=\"739\" height=\"523\" src=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Boundary-Conditions.png\" alt=\"boundary conditions applied on battery pack\" class=\"wp-image-43790\" style=\"width:554px;height:392px\" srcset=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Boundary-Conditions.png 739w, https:\/\/frontend-assets.simscale.com\/media\/2021\/03\/Boundary-Conditions-300x212.png 300w\" sizes=\"auto, (max-width: 739px) 100vw, 739px\" \/><\/a><figcaption class=\"wp-element-caption\">Figure 8: A schematic representation of the boundary conditions applied on the model<\/figcaption><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\" id=\"result-comparison\">Result Comparison<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Convergence below 1e-3 has been achieved. Calculated physical quantities such as inlet pressure, outlet velocity, and cell average temperatures have also been allowed to converge to stable values:<\/p>\n\n\n\n<figure class=\"wp-block-image size-large is-resized\"><a href=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/05\/9101112.jpg\"><img loading=\"lazy\" decoding=\"async\" width=\"809\" height=\"536\" src=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/05\/9101112.jpg\" alt=\"residuals and results cht battery pack simscale\" class=\"wp-image-45585\" style=\"width:809px;height:536px\" srcset=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/05\/9101112.jpg 809w, https:\/\/frontend-assets.simscale.com\/media\/2021\/05\/9101112-300x199.jpg 300w, https:\/\/frontend-assets.simscale.com\/media\/2021\/05\/9101112-768x509.jpg 768w\" sizes=\"auto, (max-width: 809px) 100vw, 809px\" \/><\/a><figcaption class=\"wp-element-caption\">Figures 9: The graphs for the residuals, inlet pressure, outlet velocity and average temperature of the faces of a random cell above are a good indication that the simulation is converged and reliable.<\/figcaption><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The final temperature values are displayed in the following table:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><tbody><tr><td><strong>Cell No.<\/strong><\/td><td><strong>CHT V2 SimScale\\([\u00b0C]\\)<\/strong><\/td><td><strong>CHT IBM SimScale\\([\u00b0C]\\)<\/strong><\/td><td><strong>Experiment \\([\u00b0C]\\)<\/strong><\/td><td><strong>CFD_fluent <strong>\\([\u00b0C]\\)<\/strong><\/strong><\/td><\/tr><tr><td>3<\/td><td>31.22<\/td><td>29.42<\/td><td>29.42<\/td><td>29.92<\/td><\/tr><tr><td>19<\/td><td>32<\/td><td>31.86<\/td><td>29.01<\/td><td>28.52<\/td><\/tr><tr><td>31<\/td><td>28.85<\/td><td>28.45<\/td><td>30.99<\/td><td>27.78<\/td><\/tr><\/tbody><\/table><figcaption class=\"wp-element-caption\">Table 2: The temperature on cells 3, 19 and 33 extracted from the SimScale, experimental and Fluent studies.<\/figcaption><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Comparing CHTv2 solver predictions to thermocouple readings@L1, temperature deviations of:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Cell 3: 0.53 \\(\u00b0C\\) (1.8%)<\/li>\n\n\n\n<li>Cell 19: 2.85 \\(\u00b0C\\) (9.8%)<\/li>\n\n\n\n<li>Cell 31:&nbsp; 2.54 \\(\u00b0C\\) (8.2%)<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">The temperature deviations predicted from the CHTv2 solver are in good comparison with ANSYS Fluent and the experimental data.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><a href=\"https:\/\/frontend-assets.simscale.com\/media\/2023\/08\/Experiment-vs-SimScale-vs-Fluent-TC@L1.png\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"371\" src=\"https:\/\/frontend-assets.simscale.com\/media\/2023\/08\/Experiment-vs-SimScale-vs-Fluent-TC@L1.png\" alt=\"comparing results for battery pack between simscale and others\" class=\"wp-image-78297\" srcset=\"https:\/\/frontend-assets.simscale.com\/media\/2023\/08\/Experiment-vs-SimScale-vs-Fluent-TC@L1.png 600w, https:\/\/frontend-assets.simscale.com\/media\/2023\/08\/Experiment-vs-SimScale-vs-Fluent-TC@L1-300x186.png 300w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/a><figcaption class=\"wp-element-caption\">Figure 10: Comparing <a href=\"https:\/\/www.simscale.com\/simulations\/battery-simulation-software\/\">battery pack simulation<\/a> results from SimScale with experiment and Fluent source.<\/figcaption><\/figure>\n<\/div>\n\n\n<p class=\"wp-block-paragraph\">There are some minor deviations and the reasons could be:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li>The orientation of the battery arrangement within the battery pack has been&nbsp;misrepresented in the publication (experimental setup);<\/li>\n\n\n\n<li>The battery material has been approximated via a sensitivity study.<\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">In the following image, the temperature distribution across the flow domain indicates the heat transfer from cells to the air inside the battery pack. The cutting plane displayed is normal to the z axis:<\/p>\n\n\n\n<figure class=\"wp-block-image size-large is-resized\"><a href=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/04\/Temperature-distribution-plane-normal-to-the-Z-axis.jpg\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"652\" src=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/04\/Temperature-distribution-plane-normal-to-the-Z-axis-1024x652.jpg\" alt=\"temperature distribution on cutting plane across battery pack  created in the post-processor\" class=\"wp-image-44878\" style=\"width:768px;height:400px\" srcset=\"https:\/\/frontend-assets.simscale.com\/media\/2021\/04\/Temperature-distribution-plane-normal-to-the-Z-axis-1024x652.jpg 1024w, https:\/\/frontend-assets.simscale.com\/media\/2021\/04\/Temperature-distribution-plane-normal-to-the-Z-axis-300x191.jpg 300w, https:\/\/frontend-assets.simscale.com\/media\/2021\/04\/Temperature-distribution-plane-normal-to-the-Z-axis-768x489.jpg 768w, https:\/\/frontend-assets.simscale.com\/media\/2021\/04\/Temperature-distribution-plane-normal-to-the-Z-axis.jpg 1532w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/a><figcaption class=\"wp-element-caption\">Figure 11: The temperature distribution on a plane normal to the z-axis displays the heat transfer between the components of the battery pack (especially the cells) and the flow domain<\/figcaption><\/figure>\n\n\n\n\n<div class='hw-block hw-references hw-references'>\n    <p class='hw-references__title'>References<\/p>\n    <ul class='hw-references__list'>\n\n        <li><cite><a href=\"https:\/\/www.mdpi.com\/1996-1073\/10\/8\/1157\" target=\"_blank\" rel=\"nofollow noopener\">Analysis of Cooling Effectiveness and Temperature Uniformity in a Battery Pack for Cylindrical Batteries<\/a><\/cite><\/li>\n    <\/ul>\n<\/div>\n\n\n\n<div class=\"hw-block hw-note hw-note--info hw-note\">\n    <div class=\"hw-note__title\">\n        <p class=\"hw-note__titleText\"><i class=\"fa fa-exclamation-circle\" aria-hidden=\"true\"><\/i>Note<\/p>\n    <\/div>\n    <div class=\"hw-note__body\">\n        <p>If you still encounter problems validating you simulation, then please post the issue on our <a href=\"https:\/\/www.simscale.com\/forum\/\">forum<\/a> or <a href=\"mailto:support@simscale.com\">contact us<\/a>.<\/p>\n    <\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>The aim of this project is to demonstrate the validity of SimScale&#8217;s CHT v2.0 and CHT IBM solver by performing a...","protected":false},"author":113,"featured_media":44878,"parent":17191,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"templates\/template-documentation.php","meta":{"_acf_changed":false,"_crdt_document":"","inline_featured_image":false,"footnotes":""},"class_list":["post-43775","page","type-page","status-publish","has-post-thumbnail","hentry"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.simscale.com\/wp-json\/wp\/v2\/pages\/43775","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.simscale.com\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.simscale.com\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.simscale.com\/wp-json\/wp\/v2\/users\/113"}],"replies":[{"embeddable":true,"href":"https:\/\/www.simscale.com\/wp-json\/wp\/v2\/comments?post=43775"}],"version-history":[{"count":0,"href":"https:\/\/www.simscale.com\/wp-json\/wp\/v2\/pages\/43775\/revisions"}],"up":[{"embeddable":true,"href":"https:\/\/www.simscale.com\/wp-json\/wp\/v2\/pages\/17191"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.simscale.com\/wp-json\/wp\/v2\/media\/44878"}],"wp:attachment":[{"href":"https:\/\/www.simscale.com\/wp-json\/wp\/v2\/media?parent=43775"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}